Try heating the adhesive label and then peeling it off the container: this may be the fastest method, especially suitable for thin labels. Turn the hair dryer on full power, then run it back and forth across the surface of the label for about 30 seconds to loosen the glue. If the label is too stubborn, continue heating in 30 seconds intervals until it gives way. A soapy sponge can then be used to remove any residual adhesive glue. This is a great way to remove labels from glass jars and bottles with paper labels, but is not recommended for plastic containers, which may melt from the heat applied.
If you don’t have any other methods you can try to remove the labels with a razor blade, being careful with your hands: this is a slightly more dangerous method than the previous ones. To do this, simply hold the razor blade at an angle, gently place it under the edge or corner of the label you want to remove, then push until part of it is removed. Continue by removing the rest of the label from the detached part – it may happen that the label comes off in pieces, so simply repeat the process until you have removed everything. This method is not recommended for tin and plastic cans, because you could scratch the surfaces, but only for glass ones.
